Ⅰ. TXS0108EPWR Introduction
Ⅱ. TXS0108EPWR Specifications
Ⅲ. TXS0108EPWR Feature
Ⅳ. TXS0108EPWR Applications
Ⅴ. TXS0108EPWR Packaging Information
Ⅵ. TXS0108EPWR Equivalents
Ⅶ. TXS0108EPWR Datasheet
TXS0108EPWR is a logic level converter widely used in digital circuits. It can interconnect signals of different logic levels, allowing designers to communicate and connect between different levels of signals.
This device is a 8-bit non-inverting level translator which uses two separate configurable power-supply rails. The A port tracks the VCCA pin supply voltage. The VCCA pin accepts any supply voltage between 1.4 V and 3.6 V. The B port tracks the VCCB pin supply voltage. The VCCB pin accepts any supply voltage between 1.65 V and 5.5 V. Two input supply pins allows for low Voltage bidirectional translation between any of the 1.5 V, 1.8 V, 2.5 V, 3.3 V, and 5 V voltage nodes. When the output-enable (OE) input is low, all outputs are placed in the high-impedance (Hi-Z) state. To ensure the Hi-Z state during power-up or powerdown periods, tie OE to GND through a pull-down resistor. The minimum value of the resistor is determined by the current-sourcing capability of the driver.
Product properties | Attribute Value |
manufacturer: | Texas Instruments |
Product Category: | Conversion - Voltage Level |
Series: | |
Type: | Bidirectional Voltage Level Translator |
Installation style: | SMD/SMT |
Package : | TSSOP-20 |
Supply voltage - min.: | 1.2 V, 1.65 V |
Supply voltage - maximum: | 5.5 V |
Minimum operating temperature: | - 40 C |
Maximum operating temperature: | + 85 C |
Propagation delay time: | 352 ns |
Package: | Reel |
Package: | Cut Tape |
Package: | MouseReel |
trademark: | Texas Instruments |
Data rate: | 60 Mb/s |
High level output current: | 50 mA |
Logical type: | Voltage Level Translator |
Low level output current: | 50 mA |
Range of working temperature: | - 40 C to + 85 C |
Product type: | Translation - Voltage Levels |
Factory packaging quantity: | 2000 |
Subcategory: | Logic ICs |
Weight: | 77 mg |
• No Direction-Control Signal Needed
• Maximum Data Rates
– 110 Mbps (Push Pull)
– 1.2 Mbps (Open Drain)
• 1.4 V to 3.6 V on A Port and 1.65 V to 5.5 V on B Port (VCCA ≤ VCCB)
• No Power-Supply Sequencing Required – Either VCCA or VCCB Can Be Ramped First
• Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
• ESD Protection Exceeds JESD 22 (A Port)
– 2000 V Human Body Model (A114-B)
– 150 V Machine Model (A115-A)
– 1000 V Charged-Device Model (C101)
• IEC 61000-4-2 ESD (B Port)
– ±8 kV Contact Discharge
– ±6 kV Air-Gap Discharge
TXS0108EPWR can be widely used in various circuit systems, providing system designers with more design flexibility and signal interconnection capabilities. Whether it is low power consumption, high-speed transmission or electromagnetic compatibility and stability, TXS0108EPWR can perfectly meet the needs.
• Handsets
• Smartphones
• Tablets
• Desktop PCs
Typical Application:
SN74LXC2T45QDTTRQ1
TCA39416DDFR
SN74LV1T125QDCKRQ1
SN74LXC1T14QDCKRQ1
SN74LV1T126QDCKRQ1
TCA39306DDFR
标签：TXS0108EPWR
