Tanssion > blog > semiconductor > TXS0108EPWR Specifications,Applications and Datasheet

TXS0108EPWR Specifications,Applications and Datasheet

Author: Tanssion Date: 2023-10-27 Hits: 0

Ⅰ. TXS0108EPWR Introduction
Ⅱ. TXS0108EPWR Specifications
Ⅲ. TXS0108EPWR Feature
Ⅳ. TXS0108EPWR Applications
Ⅴ. TXS0108EPWR Packaging Information
Ⅵ. TXS0108EPWR Equivalents
Ⅶ. TXS0108EPWR Datasheet

Ⅰ. TXS0108EPWR Introduction

TXS0108EPWR is a logic level converter widely used in digital circuits. It can interconnect signals of different logic levels, allowing designers to communicate and connect between different levels of signals.

This device is a 8-bit non-inverting level translator which uses two separate configurable power-supply rails. The A port tracks the VCCA pin supply voltage. The VCCA pin accepts any supply voltage between 1.4 V and 3.6 V. The B port tracks the VCCB pin supply voltage. The VCCB pin accepts any supply voltage between 1.65 V and 5.5 V. Two input supply pins allows for low Voltage bidirectional translation between any of the 1.5 V, 1.8 V, 2.5 V, 3.3 V, and 5 V voltage nodes. When the output-enable (OE) input is low, all outputs are placed in the high-impedance (Hi-Z) state. To ensure the Hi-Z state during power-up or powerdown periods, tie OE to GND through a pull-down resistor. The minimum value of the resistor is determined by the current-sourcing capability of the driver.

Ⅱ. TXS0108EPWR Specifications

Product properties

Attribute Value


Texas Instruments

Product Category:

Conversion - Voltage Level




Bidirectional Voltage Level Translator

Installation style:


Package :


Supply voltage - min.:

1.2 V, 1.65 V

Supply voltage - maximum:

5.5 V

Minimum operating temperature:

- 40 C

Maximum operating temperature:

+ 85 C

Propagation delay time:

352 ns




Cut Tape




Texas Instruments

Data rate:

60 Mb/s

High level output current:

50 mA

Logical type:

Voltage Level Translator

Low level output current:

50 mA

Range of working temperature:

- 40 C to + 85 C

Product type:

Translation - Voltage Levels

Factory packaging quantity:



Logic ICs


77 mg

Ⅲ. TXS0108EPWR Feature

• No Direction-Control Signal Needed 

• Maximum Data Rates 

– 110 Mbps (Push Pull) 

– 1.2 Mbps (Open Drain) 

• 1.4 V to 3.6 V on A Port and 1.65 V to 5.5 V on B Port (VCCA ≤ VCCB) 

• No Power-Supply Sequencing Required – Either VCCA or VCCB Can Be Ramped First 

• Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II 

• ESD Protection Exceeds JESD 22 (A Port)

 – 2000 V Human Body Model (A114-B) 

– 150 V Machine Model (A115-A) 

– 1000 V Charged-Device Model (C101) 

• IEC 61000-4-2 ESD (B Port) 

– ±8 kV Contact Discharge 

– ±6 kV Air-Gap Discharge

Ⅳ.TXS0108EPWR Applications 

TXS0108EPWR can be widely used in various circuit systems, providing system designers with more design flexibility and signal interconnection capabilities. Whether it is low power consumption, high-speed transmission or electromagnetic compatibility and stability, TXS0108EPWR can perfectly meet the needs.

• Handsets 

• Smartphones 

• Tablets 

• Desktop PCs

Typical Application:

Ⅴ. TXS0108EPWR Packaging Information

Ⅵ. TXS0108EPWR Equivalents







Ⅶ. TXS0108EPWR Datasheet



Frequently Asked Questions

1、What is the purpose of the TXS0108EPWR voltage-level translator ?
The TXS0108EPWR is a bidirectional voltage-level translator designed to convert signals between different voltage domains in electronic circuits. It can be used to interface components or devices that operate at different voltage levels, ensuring compatibility between them.
2、What voltage levels can the TXS0108EPWR handle?
The specific voltage levels that the TXS0108EPWR can handle will depend on the variant and configuration used, but typically, it is designed for translating between 1.2V, 1.8V, 2.5V, 3.3V, and 5V voltage domains.
3、How many translation channels does the TXS0108EPWR have?
The TXS0108EPWR typically has eight translation channels. It provides bidirectional voltage translation for up to eight individual signal lines.
4、What is the package type for the TXS0108EPWR?
The "EPWR" in the part number likely refers to the package type. You'll need to refer to the datasheet or product documentation to get precise information about the package type and dimensions.

Leave a Comment

Related Articles

Popular Tags

PMIC Audio Products Logic Interface capacitors linear controllers embedded Line Protection drivers amplifiers Distribution Backups wireless modules memory converters Battery Products sensors filters relays Switches distribution analog Clock timing voltage diodes speakers Batteries Rechargeable battery regulators Fiber Optic Cables Cable Assemblies routers microcontroller Backups audio Magnetics - Transformer Inductor Components cables Electric Double Layer Capacitors (EDLC) Supercapa inductors transformer optoelectronics potentiometer resistors switching management special digital purpose signal Discrete Semiconductor Ceramic Capacitors semiconductor cable Alarms equipment resonators oscillators crystals kits accessories isolators motors RF Transformers monitors comparators specialized programmable microcontrollers FPGAs Data Acquisition application specific gates inverters Buffers Transceivers dividers Sensor decoders microprocessors microprocessor DC video circuit protection microphones PCB Integrated Circuits (ICs) PMIC - Lighting Memory Cards SSDs HDDs Wires Tantalum Capacitors Transducers LEDs Battery Chargers 4G Ballast Controllers Vacuum Tubes Transistors - Bipolar (BJT) - Single counter integrated circuits Guitar Parts Buzzer Elements transducers circuit Computer Equipment Piezo Benders boxes Magnetics enclosures racks Buzzers wires and Sirens wire Buzzers and Sirens inductor components connectors interconnects CR2450 LR44 Embedded Computers TXS0108EPWR fans SS14 thermal UA741CP RC4558P hardware TNY268PN fasteners MJE2955T UC3842AN TOP245YN coils SN6505BDBVR chokes BD139 controls ATMEGA328-PU automation NE5532P identification barriers signs labels protection inductor educational networking resistor powersupply power supply prototyping fabrication desoldering soldering ESD static Tapes adhesives materials Test measurement Tools Uncategorized Specialized ICs voltage Regulators contro thermal Management motor laser full half switchers batteries translators shift latches flip flops voice playback serializers deserializers active synthesis PLDs clocks delay lines reference supervisors PoE correction lighting ballast hot swap energy metering specialty parity generators checkers FIFOs multipliers instrumentation UARTs terminators capacitive touch Modems ICs Encoders DSP Data acquisition front end timers synthesizers frequency regulator controller regula RMS power OR ideal LED gate display chargers configuration proms universal bus functions multiplexers multivibrators counters processing amps telecom repeaters splitters detector interfaces I/O expanders receivers CODECs system SoC CPLDs Complex amplifier IF RFID Oscillator Externally excited oscillator fuses switchs transistors shunt thyristor Oscillators Resonators Ballast Controllers Coils Chokes RF Filters RF/IF and RFID RF Amplifiers Battery Packs SAW Filters Mica and PTFE Capacitors Accessories Piezo Benders 1 222 sdsd ballasts starter SSD HDD Modules

Popular Posts