Ⅰ. UA741CP Introduction
Ⅱ. UA741CP Pinout
Ⅲ. UA741CP 3D Model
Ⅳ. UA741CP Specifications
Ⅴ. UA741CP Feature
Ⅵ. UA741CP Applications
Ⅶ. UA741CP Packaging Information
Ⅷ. UA741CP Alternative Model
Ⅸ. UA741CP Datasheet
The UA741CP is a general-purpose operational amplifier in an 8-pin DIP package. The high common-mode input voltage range and lack of latch-up make the amplifier ideal for voltage follower applications. The device features short-circuit protection and internal frequency compensation to ensure stability without external components. A low value potentiometer can be connected between the offset zero inputs to eliminate the offset voltage. The UA741CP is a general-purpose operational amplifier with offset voltage zeroing capability .
1. UA741CP Pinout
2.UA741CP Pin Functions
PIN | I/O | DESCRIPTION | |
NAME | NO. | ||
IN+ | 3 | I | Noninverting input |
IN– | 2 | I | Inverting input |
NC | 8 | — | No internal connection |
OFFSET N1 | 1 | I | External input offset voltage adjustment |
OFFSET N2 | 5 | I | External input offset voltage adjustment |
OUT | 6 | O | Output |
VCC+ | 7 | — | Positive supply |
VCC– | 4 | — | Negative supply |
1.UA741CP Symbol
2. UA741CP Footprint
3. UA741CP 3D Model
ECCN (US) | EAR99 |
Part Status | Active |
HTS | 8542.33.00.01 |
Automotive | No |
PPAP | No |
Type | General Purpose Amplifier |
Manufacturer Type | General Purpose Amplifier |
Number of Channels per Chip | 1 |
Maximum Input Offset Voltage (mV) | 6@±15V |
Minimum Dual Supply Voltage (V) | ±3.5 |
Typical Dual Supply Voltage (V) | ±5|±9|±12|±15 |
Maximum Dual Supply Voltage (V) | ±18 |
Maximum Input Offset Current (uA) | 0.2@±15V |
Maximum Input Bias Current (uA) | 0.5@±15V |
Maximum Quiescent Current (mA) | 2.8@±15V |
Power Supply Type | Dual |
Maximum Power Dissipation (mW) | 500 |
Typical Slew Rate (V/us) | 0.5@±15V |
Typical Voltage Gain (dB) | 106.02 |
Minimum CMRR (dB) | 70 |
Minimum CMRR Range (dB) | 70 to 71 |
Typical Gain Bandwidth Product (MHz) | 1 |
Shut Down Support | No |
Minimum Operating Temperature (°C) | 0 |
Maximum Operating Temperature (°C) | 70 |
Packaging | Tube |
Mounting | Through Hole |
Package Height | 5.08(Max) - 0.51(Min) |
Package Width | 6.6(Max) |
Package Length | 10.16(Max) |
PCB changed | 8 |
Standard Package Name | DIP |
Supplier Package | PDIP |
Pin Count | 8 |
Lead Shape | Through Hole |
Short-Circuit Protection
Offset-Voltage Null Capability
Large Common-Mode and Differential Voltage Ranges
No Frequency Compensation Required
No Latch-Up
1.UA741CP Application Information
The input offset voltage of operational amplifiers (op amps) arises from unavoidable mismatches in the differential input stage of the op-amp circuit caused by mismatched transistor pairs, collector currents, currentgain betas (β), collector or emitter resistors and so forth. The input offset pins allow the designer to adjust for mismatches resulting from external circuitry. These input mismatches can be adjusted by placing resistors or a potentiometer between the inputs as shown in following as below . A potentiometer can fine-tune the circuit during testing or for applications which require precision offset control. For more information about designing using the inputoffset pins, see Nulling Input Offset Voltage of Operational Amplifiers.
2.UA741CP Typical Application
The voltage follower configuration of the operational amplifier is used for applications where a weak signal drives a relatively high current load. This circuit is also called a buffer amplifier or unity-gain amplifier. The inputs of an operational amplifier have a very high resistance which puts a negligible current load on the voltage source. The output resistance of the operational amplifier is almost negligible, so the resistance can provide as much current as necessary to the output load.
Model | Brand | Type | Description |
UA741CPE4 | Texas Instruments | Operational Amplifiers - Op Amps | Single Channel, 1MHz, 1 amplifier, 0.5V/µs, ±9V to ±15V, DIP, 8-pin |
UA741CD | Texas Instruments | Operational Amplifiers - Op Amps | Single Channel, 1MHz, 1 amplifier, 0.5V/µs, ±9V to ±15V, SOIC, 8-pin |
LM741CN | Texas Instruments | Operational Amplifiers - Op Amps | Single Channel, 1MHz, 1 amplifier, 0.5V/µs, 10V to 36V, DIP, 8-pin |
Tags：UA741CP
