Ⅰ. NE5532P Description
Ⅱ. NE5532P Pinout
Ⅲ. NE5532P 3D Model
Ⅳ. NE5532P Specifications
Ⅴ. NE5532P Feature
Ⅵ. NE5532P Applications
Ⅶ. NE5532P vs NE5532PSR vs NE5532PE4
Ⅷ. NE5532P Package Information
Ⅸ. NE5532P Datasheet
The NE5532P devices are high-performance operational amplifiers combining excellent DC and AC characteristics. They feature very low noise, high output-drive capability, high unity-gain and maximum-output-swing bandwidths, low distortion, high slew rate, inputprotection diodes, and output short-circuit protection. These operational amplifiers are compensated internally for unity-gain operation. These devices have specified maximum limits for equivalent input noise voltage.
Pin Functions :
PIN | TYPE | DESCRIPTION | |
NAME | NO. | ||
1IN+ | 3 | I | Noninverting input |
1IN– | 2 | I | Inverting input |
OUT1 | 1 | O | Output |
2IN+ | 5 | I | Noninverting input |
2IN- | 6 | I | Inverting Input |
2OUT | 7 | O | Output |
VCC+ | 8 | — | Positive supply |
VCC– | 4 | — | Negative supply |
1. NE5532P Symbol
2. NE5532P Footprint
3. NE5532P 3D Model
ECCN (US) | EAR99 |
Part Status | Active |
HTS | 8542.33.00.01 |
SVHC | Yes |
Automotive | No |
PPAP | No |
Type | Low Noise Amplifier |
Manufacturer Type | Low Noise Amplifier |
Number of Channels per Chip | 2 |
Maximum Input Offset Voltage (mV) | 4@±15V |
Minimum Dual Supply Voltage (V) | ±5 |
Typical Dual Supply Voltage (V) | ±9|±12 |
Maximum Dual Supply Voltage (V) | ±15 |
Maximum Input Offset Current (uA) | 0.15@±15V |
Typical Input Bias Current (uA) | 0.2@±15V |
Maximum Input Bias Current (uA) | 0.8@±15V |
Maximum Quiescent Current (mA) | 16@±15V |
Power Supply Type | Dual |
Typical Slew Rate (V/us) | 9@±15V |
Typical Input Noise Voltage Density (nV/rtHz) | 8@±15V |
Typical Voltage Gain (dB) | 100 |
Typical Noninverting Input Current Noise Density (pA/rtHz) | 2.7@±15V |
Minimum CMRR (dB) | 70 |
Minimum CMRR Range (dB) | 70 to 71 |
Typical Gain Bandwidth Product (MHz) | 10 |
Shut Down Support | No |
Minimum Operating Temperature (°C) | 0 |
Maximum Operating Temperature (°C) | 70 |
Packaging | Tube |
Mounting | Through Hole |
Package Height | 5.08(Max) - 0.51(Min) |
Package Width | 6.6(Max) |
Package Length | 10.16(Max) |
PCB changed | 8 |
Standard Package Name | DIP |
Supplier Package | PDIP |
Pin Count | 8 |
Lead Shape | Through Hole |
Equivalent Input Noise Voltage:5 nV/NHz Typ at 1 kHz
Unity-Gain Bandwidth: 10 MHz Typ
Common-Mode Rejection Ratio: 100 dB Typ
High DC Voltage Gain: 100 V/mV Typ
Peak-to-Peak Output Voltage Swing 26 V TypWith Vcct= ±15 V and R= 600 Ω
High Slew Rate: 9 V/us Typ
AV Receivers
Embedded PCs
Netbooks
Video Broadcasting and Infrastructure: Scalable Platforms
DVD Recorders and Players
Multichannel Video Transcoders
Pro Audio Mixers
Typical Application ：
Some applications require differential signals. Picture as below shows a simple circuit to convert a single-ended input of 2 V to 10 V into differential output of ±8 V on a single 15-V supply. The output range is intentionally limited to maximize linearity. The circuit is composed of two amplifiers. One amplifier acts as a buffer and creates a voltage, VOUT+. The second amplifier inverts the input and adds a reference voltage to generate VOUT– . Both VOUT+ and VOUT– range from 2 V to 10 V. The difference, VDIFF, is the difference between VOUT+ and VOUT– .
Type | |||
Package | PDIP-8 | SOIC-8 | DIP-8 |
Pin Number | 8 | 8 | 8 |
speed ratio | 9.00 V/μs | 9.00 V/μs | 9.00 V/μs |
input offset voltage | 500 µV | 500 µV | 4 mV |
Supply Voltage (DC) | 15.0 V | 30.0 V | 30.0 V |
Operation Temperature | 0℃ ~ 70℃ | 0℃ ~ 70℃ | 0℃ ~ 70℃ |
length | 9.81 mm | 6.2 mm | |
Width | 6.35 mm | 5.3 mm | —— |
Height | 4.57 mm | 1.95 mm | —— |
Installation | Through Hole | Surface Mount | Through Hole |
Description | TEXAS INSTRUMENTS NE5532P operational amplifier, dual, 10MHz, 2 amplifiers, 9V/µs, ± 5V to ± 15V, DIP, 8 pins | DUAL LOW-NOISE OPERATIONAL AMPLIFIERS. Dual low-noise operational amplifiers | DUAL LOW-NOISE OPERATIONAL AMPLIFIERS. Dual low-noise operational amplifiers |
Tags：NE5532P
